Manual Stampinator Videos
Installation Instructions for the Stampinator M Manual Heat Press
The Stampinator M turns any carousel manual screen printing press into a semi-automated heat pressing machine producing 3-4x the transfers one can produce on a standard heat press. Learn how to setup the Manual Stampinator in this video for both heat pressing and screen printing.
Manual Stampinator Overview
Learn how the Manual Stampinator can make your prints better, smother, matte down fibers, and replace your flash and conveyor dryer.
Printing 5 Colors With the Manual Stampinator
Jeff shows us how to use the Manual Stampinator to print 5 colors and a white underbase.
Print-Flash-Print White using the Manual Stampinator
The Stampinator-M is a 5/1 game changer for manual screen printing. In this video Jeff shows how it can replace a flash dryer, a conveyor for final cure, and matte fibers, on top of that it can also do inline heat transfers at over 360 per hour!
Doing DTF Transfers on a Manual Press using the Manual Stampinator
Jeff shows us how we can do DTF transfers using the Manual Stampinator on a manual screen printing press.
Frequently Asked Questions
Is the stampinator compatible with my press?
The Stampinator is compatible with Roq, M&R, Workhorse, Tas, Anatol, and MHM automatic presses.
What type of substrates can I cure?
Foil, rhinestones, vinyl, stamps, plastisol ink, and waterbased ink.
Can I use the stampinator on a manual press?
No. The stampinator is designed for an automatic press.
How often will I have to replace the teflon sheet?
As long as the teflon does not rip, it should last several years.
Can I use the Stampinator as a flash dryer?
Absolutely. The typical time it takes to flash is 2-3 seconds.
I am using my Stampinator for the first time and it is smoking a little. Is this normal?
Yes, the heating element is burning off dust and debris from the heating element that has accumulated during the storage, packing, and shipping process.
What if I want to return my Stampinator?
We have a 60 day satisfaction guarantee. See more details here.
What is the warranty on the product?
There is a two year warranty on the platen, and a one year warranty on the machine.
Is there aftermarket support on the Stampinator?
Yes, we have a robust support system to assist you in assembly and production for the machine.
Do I need a special platen or can I use a standard aluminum platen?
An aluminum platen along with heat conductive rubber below the print area is required to use the Stampinator.