Apply for the Flexible Rental Program Today
If you want to make your prints better or automate your transfers with the Stampinator on your automatic screen printing press but are unsure of how it would work in your shop, the Stampinator Flexible Rental Program could be the perfect way to get started. Simply fill out the below application and we'll get back to you ASAP.
How the Flexible Rental Program works:
The Stampinator Flexible Rental Program allows you to test and use the Stampinator for two months in full production. It includes shipping, return shipping, two months of Rent on the Stampinator, virtual support with optional onsite installation, and training.
The Stampinator is the most versatile tool for an automatic screen printing shop. It can be used to:
- Pre-Stamp the garment prior to printing providing the ultimate printing surface.
- Flash Stamp the garment after your underbase replacing a flash and roller/iron in one printhead and making an amazing foundation to print on.
- Post-Stamp the garment to smooth out all fibers.
- Cure-Stamp the garment to provide a full cure on press. *works with Plastisol ink, gum rubber platen tops, and Kraft silicon paper needed for this process.
- Press-Stamp transfers or DTF transfers. *black transfer rubber platen toppers needed for DTF/SupaColor transfers.
Simply follow these steps:
- Choose your press.
- Purchase the program.
- Receive the Stampinator.
- Unbox your Stampinator.
- Setup your virtual training call or purchase onsite installation and training.
- Start Stamping.
- Choose your outcome after two months:
Keep the Stampinator - We will send you an invoice with the money you paid for the program discounted from the purchase price.
Extend your Rental - At a rate of $400/mo with a 2 month minimum extension. *additional rental months will not be discounted from future purchase prices.
Return the Stampinator - By using the initial Stampinator box and packaging material and included return label.
The Patented Stampinator 480 can improve your screen print quality and labor efficiencies as a dryer or high volume inline heat press.
The Stampinator Universal Version Fits:
-
All Anatol presses
-
Workhorse Sabre, Cutlas, Freedom, and Javelin
-
M&R Gauntlet 1 &2 2019 and older, Copperhead, Sportsman, Diamondback, Challenger 3, Cobra, and Striker
-
All TAS presses
-
All ROQ presses
-
All MHM presses
Package Includes
- Stampinator 480 Universal.
- Extra Teflon Sheet.
- Heat Conductive Green Rubber Insert.
- 12' Pigtail Power Cord for wiring in a plug. *ROQ Package Includes ROQ Compatible Plug.
- Side clamps will be included except for ROQ units.
Make your prints better and automate your transfers by
- Stamp Flashing The Underbase (replaces first flash, roller, or iron which saves a printhead).
- Matting down fibers prior to printing.
- In-Line Heat Transfer.
- In-Line Screen Numbers.
- In-Line Speciality Applications like Foil and Rhinestones.
- In-line Stamp Curing completing a final cure on press.
- And much more!
Flash speeds range between 2-5 seconds.
Capability of producing over 480 transfers per hour.
Testimonials
Stampinator Stories: Shawn Kirpatric, Owner of Print Hybrid
"Shawn Kirpatric, owner of Print Hybrid talks about his two Stampinators on his M&R presses and how to adjust the timing using the squeegee sensors."
Stampinator Stories with Mike W from Swell Ink
Mike W from Swell Ink tells us how he uses the Stampinator with a grey blocker. Grey blockers can make your prints feel like a parking lot, so Mike uses the Stampinator to give his prints a nice smooth feel.
